Focus First Flash Ms1690 Driver Download

Focus First Flash Ms1690 Driver Download

Download Zip ===> https://urluss.com/2tMLM5

How to Download and Install the Focus First Flash MS1690 Driver for Windows 10

The Focus First Flash MS1690 is a high-performance barcode scanner that can read both 1D and 2D codes. It has a flexible design that allows it to scan codes on various surfaces, such as paper, plastic, or mobile screens. It also has a built-in illumination system that enhances the image quality and readability of the codes.

If you want to use the Focus First Flash MS1690 scanner with your Windows 10 PC, you need to download and install the correct driver for it. The driver is a software program that enables the communication between the scanner and the PC. Without the driver, the scanner will not work properly or at all.

In this article, we will show you how to download and install the Focus First Flash MS1690 driver for Windows 10 in a few simple steps.

Step 1: Download the driver

The first step is to download the driver from the official website of Honeywell, the manufacturer of the Focus First Flash MS1690 scanner. You can find the driver by following this link: MS1690 Focus Rev. A - not detected by the HSM USB COM Port driver.

On this page, you will see a table with different files for different versions of the scanner. You need to select the file that matches your scanner model and interface type. For example, if you have a MS1690-106 USB FS Rev. A scanner, you need to download the file named "MS1690-106 USB FS Rev A.zip".

Click on the file name to start the download. Save the file to a location where you can easily find it later.

Step 2: Extract the driver

The next step is to extract the driver from the zip file that you downloaded. To do this, you need a program that can open zip files, such as WinZip or 7-Zip. If you don't have one, you can download and install one from their respective websites.

Once you have a zip program installed, right-click on the zip file and select "Extract All". Choose a destination folder where you want to extract the driver files. Click on "Extract" to start the process.

After the extraction is complete, you will see a folder with several files inside. These are the driver files that you need to install.

Step 3: Install the driver

The final step is to install the driver on your Windows 10 PC. To do this, follow these steps:

Connect your Focus First Flash MS1690 scanner to your PC using a USB cable.

Open the folder where you extracted the driver files.

Double-click on the file named "setup.exe" to launch the installation wizard.

Follow the on-screen instructions to complete the installation.

Restart your PC if prompted.

Congratulations! You have successfully downloaded and installed the Focus First Flash MS1690 driver for Windows 10. You can now use your scanner with any compatible software or application on your PC.

How to Troubleshoot the Focus First Flash MS1690 Scanner

Sometimes, you may encounter some problems with your Focus First Flash MS1690 scanner, such as poor scanning performance, error tones, or LED flashes. These problems may be caused by various factors, such as hardware failure, software issues, or incorrect settings. In this section, we will show you how to troubleshoot some common problems with your scanner and how to fix them.

Problem: The scanner does not scan or transmits 'razzberry' tones

This problem may indicate that the scanner has a hardware failure or a communication error. To diagnose and solve this problem, follow these steps:

Check the visual indicators on the scanner. The scanner has two LEDs: a green LED and a red LED. The green LED indicates the power status and the red LED indicates the scanning status. If the green LED is off, it means that the scanner is not receiving power. If the red LED is flashing rapidly, it means that the scanner is in a failure mode. Refer to the section 'Visual Indicators' or 'Failure Modes' in the user guide for more details.

Check the connection between the scanner and the PC. Make sure that the USB cable is securely plugged into both devices and that there are no damages or bends on the cable or the connectors. If possible, try using a different USB cable or port.

Check the driver installation on your PC. Make sure that you have downloaded and installed the correct driver for your scanner model and interface type. Refer to the section 'How to Download and Install the Focus First Flash MS1690 Driver for Windows 10' for more details.

If none of the above steps solve the problem, contact Honeywell support for further assistance.

Problem: The scanner scans poorly or does not read some codes

This problem may indicate that the scanner has a low image quality or a wrong configuration. To diagnose and solve this problem, follow these steps:

Check the condition of the codes that you are trying to scan. Make sure that they are not damaged, faded, wrinkled, or obscured by dirt or glare. If possible, try scanning different codes or printing new ones.

Check the position and angle of the scanner relative to the codes. Make sure that you are holding the scanner at a proper distance and orientation from the codes. The optimal distance is about 15 cm (6 inches) for 1D codes and about 20 cm (8 inches) for 2D codes. The optimal angle is about 45 degrees for 1D codes and about 90 degrees for 2D codes.

Check the settings of the scanner. Make sure that you have configured the scanner according to your scanning needs and preferences. You can use configuration bar codes to change various settings, such as code type, trigger mode, illumination mode, beep volume, etc. Refer to the section 'Configuration' in the user guide for more details.

If none of the above steps solve the problem, contact Honeywell support for further assistance.

How to Use the Focus First Flash MS1690 Scanner

Once you have downloaded and installed the driver for your Focus First Flash MS1690 scanner, you can start using it with any compatible software or application on your Windows 10 PC. The scanner can scan both 1D and 2D codes in various formats, such as UPC, EAN, QR, PDF417, Data Matrix, and more. It can also scan codes on different surfaces, such as paper, plastic, or mobile screens.

To use the scanner, follow these steps:

Make sure that the scanner is connected to your PC and powered on. You should see a green LED on the scanner indicating that it is ready to scan.

Launch the software or application that you want to use with the scanner. For example, if you want to scan a code into a spreadsheet, open Microsoft Excel or Google Sheets.

Place the code that you want to scan in front of the scanner. Make sure that the code is within the scanning area and that there is enough contrast and lighting for the scanner to read it.

Press the trigger button on the scanner to start scanning. You should hear a beep and see a red LED on the scanner indicating that it has captured the code.

The scanned code will be transmitted to your PC and entered into the software or application that you are using. You can verify that the code is correct and edit it if needed.

You can repeat these steps for any other codes that you want to scan. You can also change the settings of the scanner using configuration bar codes. Refer to the section 'Configuration' in the user guide for more details.

How to Update or Uninstall the Focus First Flash MS1690 Driver

If you want to update or uninstall the driver for your Focus First Flash MS1690 scanner, you can do so using the Windows Device Manager. The Device Manager is a tool that allows you to manage the devices and drivers connected to your PC. To access the Device Manager, follow these steps:

Click on the Start button on your PC and type "Device Manager" in the search box.

Select "Device Manager" from the list of results.

In the Device Manager window, look for "Imaging devices" and expand it.

You should see your Focus First Flash MS1690 scanner listed under "Imaging devices". Right-click on it and select "Update driver" or "Uninstall device" depending on what you want to do.

Follow the on-screen instructions to complete the process.

If you update or uninstall the driver, you may need to restart your PC for the changes to take effect.

How to Contact Honeywell Support for the Focus First Flash MS1690 Scanner

If you have any questions or issues with your Focus First Flash MS1690 scanner that are not covered by this article or the user guide, you can contact Honeywell support for further assistance. Honeywell is the manufacturer of the scanner and provides technical support and customer service for its products.

To contact Honeywell support, you can use one of the following methods:

Visit the Honeywell website at https://www.honeywellaidc.com/ and click on "Support" at the top menu. You can find various resources, such as product manuals, software downloads, FAQs, warranty information, and more. You can also submit a support request online by filling out a form with your contact details and issue description.

Call the Honeywell support phone number at 1-800-782-4263 (toll-free in the US and Canada) or +1-954-202-6660 (international). You can speak to a support representative who can help you with your issue. The phone support is available from Monday to Friday, 8:00 AM to 6:00 PM Eastern Time.

Email the Honeywell support team at aidc.support@honeywell.com. You can send an email with your contact details and issue description. You will receive a reply within 24 hours.

When contacting Honeywell support, make sure that you have the following information ready:

Your scanner model and serial number. You can find these on a label at the bottom of the scanner.

Your PC model and operating system. You can find these by right-clicking on "This PC" or "My Computer" on your desktop and selecting "Properties".

Your driver version and installation date. You can find these by opening the Device Manager, right-clicking on your scanner under "Imaging devices", and selecting "Properties". Then, click on the "Driver" tab.

A detailed description of your issue and the steps that you have taken to solve it.

Honeywell support will try their best to help you resolve your issue as soon as possible.

Conclusion

The Focus First Flash MS1690 scanner is a powerful and versatile device that can scan both 1D and 2D codes on various surfaces. It can be used with any compatible software or application on your Windows 10 PC. To use the scanner, you need to download and install the correct driver for it. You also need to configure the scanner according to your scanning needs and preferences. If you encounter any problems with the scanner, you can troubleshoot them using the user guide or contact Honeywell support for further assistance.

We hope that this article has helped you learn more about the Focus First Flash MS1690 scanner and how to use it. If you have any feedback or suggestions, please let us know in the comments below. 4aad9cdaf3